To help you understand our approach and decide on the best LP12 option for you, here is a brief background on the work we do.
Overview
As with all LP12s supplied by us, they will have been built from scratch so each component is disassembled, cleaned and checked & tested for suitability before being selected for use as part of our turntable builds.
Once assembled, they are put on listening test in advance of sale to ensure the performance is commensurate with the level of specification that has been used.
The above includes but is not limited to:
Plinth checked for trueness, cleaned and oiled (refinished where appropriate)
Top plate checked for trueness & fitment, cleaned & polished
Sub-chassis checked for trueness
Main bearing housing drained of oil, cleaned and inspected before receiving fresh oil
Motor checked for excessive end-float, noise, pulley surface cleaned, and spindle oiled
All electrical contact points checked/redressed
Arm and cartridge geometry and alignment checked and set (where applicable)
New suspension fitted
New belt fitted (where appropriate)
Fully test played prior to demonstration/installation
Any replacement parts fitted are new, unless there is an equivalent/suitable period specification part available.
Options
In addition to common upgrades such as arms and cartridges, we offer other options such as spring kits, power supplies and core support (top plates, sub chassis’) to enhance the turntable and take its performance even higher, should you so wish.
Let us know what you are looking to achieve and we can discuss options with you.
Postage
If you live within 50 miles of Liquid Audio, we will personally deliver and install the turntable for you.
You are also free to collect where you have the option of a full demonstration beforehand.
You can find all current LP12s available, below. If you would like something more specific or built around an existing turntable or components you have, contact us to discuss further.
Ref# B2312
Linn Sondek LP12 Black Ash/Cirkus/Valhalla PSU/Linn Basik Plus /2M Blue
Specification
Fluted Black Ash plinth
Aftermarket clear lid (new)
Linn hinges and backplates (new)
Linn top plate
Linn motor with new Thakker Belt
Linn Cirkus bearing
Linn sub-chassis
Linn armboard
Linn Outer Platter with Linn mat
Linn cross-brace
Valhalla PSU (recapped)
Linn Basik Plus Tonearm with new cartridge tags
Ortofon 2M Blue MM Cartridge (new)
This is a lovely original example is in very good condition.
This is largely original deck which has now been upgraded with a new clear lid (aftermarket) and hinges as well as a recapped power supply by Class A in Sheffield. The tonearm also benefits from new cartridge tags.
Overview
Points of note (pictured)
There are two areas on the top of the plinth where the lid has previously come into contact and had left witness marks to the finish.
This is another excellent example which is ready to just plug in and play.
£1275
Ref# 2403
1983 Linn Sondek LP12
Valhalla/Basik Plus
Specification
Linn fluted Afromosia plinth
Linn clear lid with new hinges
Linn top plate
Linn motor with new Linn Belt
Linn Peek bearing
Linn sub-chassis
Linn tonearm board
Linn Outer Platter with Linn mat
Stack Audio Alto cross brace
Linn Valhalla PSU (33rpm)
Linn Basik Plus tonearm
Linn baseboard
Overview
Points of note (pictured)
There are some light signs of use on the top of the plinth and on the front right corner.
There are some surface scratches to the lid but it is presentable.
(Audite Acoustics Duo Niva isolation platform not included)
This is a great, usable example of an original and cost-effective entry into the world of the LP12.
£1115
Ref# 2404
Tangerine Audio LP12
Stiletto/Plateau/Skorpion/Cirkus/Aro
Armageddon
Specification
Tangerine Audio Stiletto plinth (custom finish)
Linn clear lid with new hinges
Linn motor with Linn Belt (both new)
Linn Cirkus bearing
Tangerine Audio Plateau sub chassis
Tangerine Audio tonearm board
Linn Outer Platter (new)
Collaro Audio Mat (new)
Linn cross brace (new)
Naim Armageddon PSU (33rpm)
Naim Aro tonearm (with original box and accessories)
Dynavector 20x2L MC cartridge
Tangerine Audio Skorpion baseboard
This is a unique custom build of a very high specification. It comprises of a suite of all aluminium Tangerine Audio upgrades such as the one-piece Stiletto plinth - finished in gloss black around the ‘plinth’ area - as well as the Plateau sub chassis, armboard and Skorpion baseboard with feet and cups.
In addition to this, the deck is fitted with the Naim Aro unipivot tonearm and Armageddon power supply which for many, are the only choice for their LP12.
This has just been built up following the custom paintwork so is ‘as new’ and is a highly detailed and musical turntable which is best allied to an equally high performing system.
£POA
Ref# 2405
1983 Linn LP12
Cirkus/Valhalla/Basik Plus/2M Red
Specification
Linn fluted Afromosia
Linn clear lid with new hinges
Linn motor with new Linn Belt
Linn Cirkus bearing
Linn sub chassis
Linn tonearm board
Linn Outer Platter and new mat
Linn cross brace
Linn Valhalla PSU (33rpm)
Linn Basik Plus tonearm
Ortofon 2M Red MM cartridge (new)
Linn baseboard
Overview
Points of note (pictured)
There are some surface scratches to the lid but it is presentable.
(Audite Acoustics Duo Niva isolation platform not included)
This is another example of a cost-effective, turnkey LP12. With a lovely Greaves of Sheffield plinth and some new consumables, this also benefits from a new cartridge so you just need to plug in and play.
£1365
Ref# 2407
1990 Linn LP12 #72507
Cirkus/Zeus/Nima
Specification
Linn flush Black
Linn clear lid with new hinges
Linn motor with new Linn Belt
Linn Cirkus bearing
Linn sub chassis
Linn tonearm board (new)
Linn Outer Platter and new mat
Linn cross brace (new)
Valhalla Electronics Zeus internal PSU (33 & 45rpm)
Roksan Nima tonearm
Linn Trampolinn baseboard
This is a very musical player with superb timing and detail thanks to the combination of the Zeus and Nima. It will benefit from a high quality cartridge which we can supply and fit or we’re happy to fit your existing cartridge for you.
As usual, there are a number of new parts added to enhance the performance and longevity of the turntable for years to come. The box for the tonearm is included in the sale.
Overview
Points of note (pictured)
There are surface scratches and marring to the lid
(Audite Acoustics Duo Niva isolation platform not included)
£1755
Ref# B2314
LP12 in Black Ash/Peek Bearing/Linn Lingo PSU/Rega RB300 Tonearm/2M Blue
£SOLD
Ref# 2406
1985 Linn LP12
Valhalla/Rega RB250/2M Red
£SOLD
Ref# B2306
1983 Linn Sondek LP12 VE Minos/Rega RB250/2M Blue
£SOLD
Ref# 2402
1988 Linn Sondek LP12
Valhalla/Basik Plus/K9
£SOLD
Ref# CSAK
1995 Linn Sondek LP12 Radikal/Karousel/Keel/Aro/Delos
Specification
Linn fluted Walnut plinth (1995)
Linn clear lid with hinges
Linn top plate
Linn Radikal motor with new Linn Belt
Linn Karousel bearing
Linn Keel sub-chassis
Linn Outer Platter with new Linn mat
Linn cross-brace
Linn Radikal PSU
Naim Aro Tonearm
Linn Trampolinn 2 baseboard
Lyra Delos MC Cartridge
£SOLD