Valhalla Electronics have developed three different power supplies to enhance the performance of your LP12.
Each PSU offers high grade components for efficient and accurate control of power, along with the ability to benefit from both 33 & 45 RPM.
-
Minos LP12 PSU
Most Linn turntables with Valhalla boards do not run at 33.33 rpm and have quite large variations in speed, some running as high as 34rpm. Upgrading to the Minos motor controller makes significant improvements to the listening sound stage, the sense of timing and rhythm of the track is far tighter.
Available in both 220V and 110V.
-
Zeus
The Zeus controller uses the same internal board as the Minos but with the addition of an optical platter speed sensor and OLED display.
Additionally, control over motor parameters such as frequencies, phase angle, voltage amplitude via a serial interface. Adjusting these values enables the smoothest motor operation with minimum motor noise and vibration. Values may be written to EEPROM once optimum setup is achieved.
The boards will ship with suggested default values but are fully configurable to suit your setup via USB serial connection.
Available in both 220V and 110V
-
Zeus (Offboard)
The external version of the Zeus is supplied in either a silver or black anodized aluminium case with connecting cables to the breakout board installed on the Linn cross brace where the OLED, sensor, switch and motor are attached.
Enhancing performance even further by keeping the internal board in it’s own enclosure, away from the turntable, this ensures vibrations and heat aren’t able to have any detrimental effect on the power supply.
Available in both 220V and 110V